ICT Killzone Times and Macro Windows: New York Time Cheat Sheet

No indicator is right for everyone — it depends on what you trade and what you already know how to read. But the ones worth keeping share a short list of properties, and the ones you uninstall tend to fail in the same four places. Here’s the checklist, category by category.

By SWEEPLOGIC

Dial with a clock hand and glowing arc representing ICT killzone and macro time windows

In New York time, the ICT killzones for index futures run London 02:00–05:00, New York AM 08:30–11:00, New York PM 13:30–16:00 and Asia 20:00–00:00, with shorter macro windows from about :50 to :10 around the hour inside them.

Every ICT setup has a timestamp. The same three-candle gap at 09:51 and at 12:15 sits in a different market: different participation, different range, different follow-through. Time is the cheapest filter you can apply.

This post is the cheat sheet: the windows, how to read them, where traders get the clock wrong, and how to mark them on a NinjaTrader 8 chart. For the reasoning behind using time as a filter, read Time Is a Filter: Killzones and Macro Windows.

The killzone cheat sheet (New York time)

  • Asia, 20:00–00:00 ET. Lowest participation on index futures. Ranges compress, and the Asia high and low often become liquidity targets later.
  • London, 02:00–05:00 ET. European participation arrives. It often sets the first directional move and a high or low that New York later runs.
  • New York AM, 08:30–11:00 ET. The busiest window. Economic releases, the cash open and most of the day’s range.
  • Midday, roughly 11:30–13:30 ET. Thin and choppy. Most traders treat it as a stay-out period.
  • New York PM, 13:30–16:00 ET. Often a continuation of the morning move, or a reversal into the close.

These are community conventions, not an official standard. Sources disagree by up to an hour on the edges, especially the New York AM window (07:00 or 08:30 start). Pick one definition, write it down and keep it fixed for at least a month so you can judge it fairly.

Macro windows: the :50 to :10 pattern

Macros are narrower. A macro is a window of about twenty minutes, from ten minutes before a clock hour to ten minutes after it, for example 09:50–10:10. The idea is that range expansion is more likely inside these windows than in the minutes between them.

Published macro lists differ on which hours count, so do not copy one blindly. The ones most traders start with are the windows inside London, New York AM and New York PM. Add others only after you have seen them help on your own chart.

A macro window is not a signal. The clock reaching :50 does not mean anything will happen. It tells you when to pay attention to setups you would already consider. A useful sequence inside a window is a sweep of a nearby high or low, displacement away from it, and a fair value gap left behind. See the fair value gap indicator guide for the gap side.

The timezone trap

Windows are defined in New York time. Your chart may not be. Two things go wrong.

  1. Exchange time versus display time. CME session templates in NinjaTrader 8 are in Central Time. An indicator that reads times from the trading-hours template instead of your display timezone plots every window an hour off for an Eastern trader. The shading looks plausible and is wrong.
  2. Daylight saving. New York and London change clocks on different dates, so the gap between them shifts for a couple of weeks each spring and autumn. A hardcoded UTC offset will be wrong in those weeks. Times need to resolve through a real timezone database.

If your windows do not line up with another trader’s, check these two first.

How to use the windows without forcing trades

  1. Choose one or two windows. Most traders do better with New York AM alone than with five sessions at once.
  2. Mark levels before the window opens. Prior highs and lows, the Asia range and your zones. See Draw on Liquidity.
  3. Wait for the sequence. Sweep, displacement, gap. If it does not appear, there is no trade.
  4. Count trades, not minutes. If the filter is working, your trade count drops.

Knowing a window is open creates pressure to find something in it. If you catch yourself hunting for a setup because the clock says so, the filter has become a trigger. Time also says nothing about direction. For zones that form inside a window, how to tell which order blocks matter covers the next filter.

Quick answers

What are the ICT killzone times in New York time?
Asia 20:00–00:00, London 02:00–05:00, New York AM 08:30–11:00 and New York PM 13:30–16:00, as commonly used for index futures.

What is an ICT macro?
A window of about twenty minutes around a clock hour, from roughly :50 to :10, where range expansion is more likely than in the minutes between.

Are killzone times the same all year?
They are fixed in New York time. Your local clock or UTC offset moves with daylight saving, so use a timezone-aware tool.

Should I only trade inside killzones?
That is a personal rule, not a requirement. Killzones are context: a setup inside one has different conditions from the same setup at midday.

Where ICT Macros fits

ICT Macros is SweepLogic’s native NinjaTrader 8 indicator for this. It shades the ICT session macro windows across Asia, London, NY AM, Midday and NY PM directly on your chart, handles daylight saving so windows land at the right time year-round, and marks do-not-trade zones so you can see when to stay out of the chop.

If you want a free tool to pair with it, the First Presented FVG marks one gap per session at no cost. The full range is on the SweepLogic tools page. Questions? Ask in the SweepLogic Discord or contact support.


Educational and technical content only. Nothing here is financial advice. SweepLogic is not affiliated with NinjaTrader; NinjaTrader and NinjaScript are trademarks of their respective owner. Futures trading involves substantial risk of loss and is not suitable for every investor.

ict macros

ICT Macros

Marks every ICT macro window — automatically, DST-aware.

Scroll to Top